PROSES PENGAMBILAN DATA DAN PEMANFAATAN GEOLISTRIK METODA 4-D UNTUK PEMETAAN GEOLOGI BAWAH PERMUKAAN

Authors

  • AGUS KUSWANTO KUSWANTO Pusat Teknologi Pengembangan Sumberdaya Mineral - Badan Pengkajian dan Penerapan Teknologi

DOI:

https://doi.org/10.29122/mipi.v12i1.501

Abstract

Geoelectricas as a method and tool for exploration has been started since the 1900s.The development of computer technology at this time makes the application of geoelectric method is now becoming more popular.The application of geoelectric methods  usually for groundwater exploration but now widely used for mineral exploration and engineering geology.Today's inversion technique uses many geo-electric methods with 3-D configurations. The process of selecting the geoelectric method is important so that we can choose to use it. This research was conducted to utilize 4-D geoelectric method to identify object dynamics: waste seepage, soil density and groundwater. The application of this method (4-D) was identified to be used for monitoring and detecting potential flow of a fluid or sediment.

 

Keyword : resistivity 3-D, resistivity 4-D, soil density, infiltration.

Author Biography

AGUS KUSWANTO KUSWANTO, Pusat Teknologi Pengembangan Sumberdaya Mineral - Badan Pengkajian dan Penerapan Teknologi

Agency for the assessment and aplication of technology

References

Dey, A., Morrison H.F., 1979. Resistivity Modelling for Arbitrarily Shaped Two-Dimensional Structures, Geophysical Prospecting 27, I06 – I36.

Griffiths D.H. and Baeker R.D.1993, Two dimensional resitivity imaging and modeling in area of complex geology. Journal of Applied Geophysics.

Jackson P.D., Earl S.J., Reece G.J., 2001. 3D Resistivity Inversion Using 2D Measurement of the Electric Field, Geophysical Prospecting, 2001, 49, p. 26-39.

Kuswanto A, , Pemetaan Geologi Bawah Permukaan Menggunakan Metoda Geolistrik 4-D, Majalah Lingkungan, Jakarta, 2010.

Kuswanto A, Pengembangan Metode Geolistrik 4-D untuk Perembesan Bawah Tanah (Development of 4-D Geoelectric Methode to Identify Subsurface Leakage), Prosiding PI-BPPT, 2015.

Loke M.H., 2000. Electrical Imaging Surveys for Environmental and Engineering Studies, A practical guide to 2-D and 3-D surveys,

Loke, M.H., Barker R.D., 1996. Practical Techniques for 3D Resistivity Surveys and Dta Inversion, Geophysical Prospecting, 1996, 44, p. 449 - 523

Mansurudin, A, 2005. Aplikasi Metode Geolistrik Resistivitas Untuk Menentukan Letak Akumulasi Rembesan Polutan Sampah Di Tempat Pembuangan Akhir (TPA) Pakusari, Jember. Jurusan Fisika Universitas Jember.

Manyou. I.N, Pengantar Pemetaan Bawah Permukaan, Bahan Kuliah, 2018.

Minas, M., 2010. Monitoring Runoff from Highways Using 2-D and 3-D Resistivity Methods : case Study from Bjornnasvagen, Northern Stockholm, Degree Project for the Master Program in Environmental Engineering and Sustainable Infrastructure, Department of Land and Water Resources Engineering, Royal Institute of Technology, Sweden.

Pidlisecky A, Haber, E. and Knight, R.J.,2007. RESINVM3D : A 3D Resistivity Inversion Package, Geophysics, vol. 72 (March-April 2007),p.H1-H10.

Reynolds J.M., 1997. An Introduction to Applied and Environmental Geophysics, John Willey and Sons Ltd., England.

Yi , M.-J., Kim J.-H., Song Y., Cho S.-J., 2001. Three-dimensional Imaging of Subsurface Structures Using Resistivity Data, 2001, 49, 483-497.

Downloads

Published

2018-05-02