PENERAPAN METODE FAST FIRING PROCESS PADA PEMBUATAN KERAMIK UKIR JENIS STONEWARE

Main Article Content

M. Dachyar Effendi

Abstract

To reduce energy consumption in ceramic process, Investigation of fast firing
methode to produce relief product has been carried out. Best Ceramic
composition applied to produce rellief without defect when burned in normal firing
traject. The composition consists of Kalimantan clay :52,5 %, Penujak clay 10%,
Felspar RRC 16%, Talk 2,00 – 5,00%, limestone 2,5% - 6,50% and Ballclay
13,00 – 13,50% and agree with stoneware qualification. In this research, Desired
temperature reached at 7 hour, decreased 2 hour compare to normal firing
traject. Crack occured on some rellief products indicated that the product with
differ thickenness significantly along ceramic body can not be applied into fast
firing process.
Kata kunci: keramik ukir, stoneware

Article Details

How to Cite
Effendi, M. D. (2009). PENERAPAN METODE FAST FIRING PROCESS PADA PEMBUATAN KERAMIK UKIR JENIS STONEWARE. Jurnal Energi Dan Lingkungan (Enerlink), 5(1). https://doi.org/10.29122/elk.v5i1.1578
Section
ARTICLE