DOMESTIC COMPONENT LEVEL ASSESSMENT FOR A SALT FACTORY AND A SALT PRODUCTION

Authors

  • Irhan Febijanto Centre for Assessment of Industry and Energy Process-BPPT
  • Adiarso Centre for Assessment of Industry and Energy Process-BPPT
  • Ati Widiati Centre for Assessment of Industry and Energy Process-BPPT
  • Dharmawan Centre for Assessment of Industry and Energy Process-BPPT
  • Dadang Rosadi Centre for Assessment of Industry and Energy Process-BPPT
  • Ermawan Darma Centre for Assessment of Industry and Energy Process-BPPT
  • Gatyo Angkoso Centre for Assessment of Industry and Energy Process-BPPT
  • Karnadi Centre for Assessment of Industry and Energy Process-BPPT
  • Kusrestuwardhani Centre for Assessment of Industry and Energy Process-BPPT
  • Mohamad Soleh Iskandar Centre for Assessment of Industry and Energy Process-BPPT
  • Nurus Sahari Laili Centre for Assessment of Industry and Energy Process-BPPT
  • Priyambodo Darmoyuwono Centre for Assessment of Industry and Energy Process-BPPT
  • M.Rosjidi Centre for Assessment of Industry and Energy Process-BPPT
  • Sunengsih Centre for Assessment of Industry and Energy Process-BPPT

Abstract

The TKDN (Domestic Component Level) assessment of goods and services is a method to determine local manufacturers/industrie’s capability to create quality products internationally standardized. This study assessed the salt factory's TKDN to increase the NaCl content, based on cost-based analysis stipulated at the Minister Industry Regulation No.16/M-IND/PER/2/2011. Meanwhile, the TKDN of salt production was assessed based on process-based analysis stipulated in Minister Industry Regulation No.16/2020. According to the cost-based analysis results, the goods and services at the pilot project stage had the TKDN value of 27.4%. However, due to an increase in the number of main domestic components at the commercial stage, this value increased to 70.9%. Meanwhile, according to the processed-based analysis results, the salt production had the same processes at the pilot project stage and commercial stages. The TKDN value of 85.5% was obtained for the two stages. The value is relatively high because the raw material is produced locally with the local labor and used work tools owned by the local industry. The cost-based analysis was found to be highly dependent on the equipment component’s origin, while the process-based analysis depends on the origin of labor, works tool, and material owner.

Keywords: domestic component level; process-based analysis; cost-based analysis; salt factory; salt product.

References

Pujiastuti, C., Sumada, K., Ngatilah, Y., Hadi, P., Removal of Mg2+, K+, SO4-2 Ions from Seawater by Precipitation Method, MATEC Web of Conference 58, 01022, 2016, BISSTECH.

Pangestu, R.G., Perlindungan hukum terhadap petambak garam rakyat dikaitkan dengan berlakunya peraturan pemerintah nomor 9 tahun 2018 tentang tata cara pengendalian impor untuk komoditas perikanan dan penggaraman sebagai bahan baku dan bahan penolong industri, Dialogia Juridica, 10(1), November 2018, pp.077-095.

Mayasari, V.A., dan Lukman, R., Studi peningkatan mutu garam dengan pencucian, 2011, rosihttp://digilib.its.ac.id/public/ITS-Undergraduate-10536-Paper.pdf, diakses tanggal 6 Oktober 2020.

Sumada, K., Dewati, R., Suprihatin, Garam industri berbahan baku garam krosok dengan metode pencucian dan evaporasi, Jurnal Teknik Kimia, 11(1), 2016.

Umam, F., Pemurnian garam dengan metode rekristalisasi di desa bunder pamekasan untuk mencapai SNI garam dapur, Jurnal Pangabdhi, 5(1), 2019, pp. 24-27.

Windaru, A., Budiman, A.H., 2017. Analisa biaya pembangkitan pembangkit listrik tenaga panas bumi skala kecil, Jurnal Energi dan Lingkungan, 13(2), 2017, pp. 47-50.

Sucahyo, B., Hakim, D.L., Ridlo, R., Rini, T.P., Sari, E.R., 2019. Kajian Teknologi Pemanfaatan Biogas POME (Palm Oil Mill Effluent) ke Boiler, Majalah Ilmiah Pengkajian Industri, 13(1), 2019, pp.43-54.

Hidayat, T., and Ma’ruf,. B, Analisis Peningkatan Kandungan Komponen Lokal pada Pembangunan Kapal Baru di dalam Negeri, Jurnal Wave, Vol 10 No 2, 2016, pp.61-66.

Peraturan Menteri Perindustrian Republik Indonesia Nomor: 16/M-IND/PER/2/2011 Tahun 2011 tentang Ketentuan dan Tata Cara Penghitungan Tingkat Komponen Dalam Negeri.

Peraturan Menteri Perindustrian Republik Indonesia Nomor 16 tahun 2020 tentang Ketentuan dan Tata Cara Penghitungan Nilai Tingkat Komponen Dalam Negeri Produk Farmasi.

Tansil, Y., Belina, Y., Widjaja, T., Produksi garam farmasi dari garam rakyat, Jurnal Teknik ITS, 5(2), 2016, ISSN: 2337-3539 (2301-9271 Print)

Nuryati, Farmakologi: Bahan Ajar Rekam Medis dan Informasi Kesehatan, Pusat Pendidikan Sumberdaya Manusia Kesehatan, Kementerian Kesehatan Republik Indonesia, Cetakan ke 1. 2017.

Downloads

Published

2021-04-28